The latest Blood Angel is nearing completion. Few minor details to complete on the main body and then finish the back pack.
Have used Nuln Oil Gloss and Non-gloss plus VMC Smoke for shading and weathering so far. Once the model is assembled will finish off the weathering with oil paints and pigments.
Also assembled the third module for the Underhive board. Added a 2mm MDF base, since I want to make this one appear as if the floor has collapsed. Lets see how that goes!
I'm going to put a further base over the top of the MDF, just not sure what material to use. Though I have a pretty good idea what I going to fill the space with.
The Emperor Protects
Wednesday, 10 April 2019
Wednesday, 3 April 2019
Progress Report 92.19.M3
More work completed on the next Blood Angel Primaris marine. Decided to try a different approach by airbrushing MIG Ammo Dark Rust over the darker Vallejo Hull Red. Then took it a stage further by airbrushing on the legs only VMA Steel. The idea being I would work scratches into the initial painting and make the red brighter when applied to the new lighter base colours.
Happy with the first results I then applied VMA Steel roughly to the rest on the model via a brush. Not to clear in that photo but on the Marines right leg I worked the red up from VMC Flat Red, vermillion and finally Aramantha Red. Then used VMC Dark Rust (which is much darker red brown than the MIG Ammo Dark Rust which is a more orange brown! Confusing!) for damage followed by VMC Oily Steel and some VMA Steel. Starting to like the Vallejo Model Air Steel with it being brighter than the Oily Steel and should show up more on the model. So still adding further weathering with a brush but working off a steel base cuts out some of the leg work.
The black areas have been painted with VMC Dark Grey. I tend used a dark grey or black grey more for a black base than true black.
Also built and primed the next Escher.
The Emperor Protects.
Happy with the first results I then applied VMA Steel roughly to the rest on the model via a brush. Not to clear in that photo but on the Marines right leg I worked the red up from VMC Flat Red, vermillion and finally Aramantha Red. Then used VMC Dark Rust (which is much darker red brown than the MIG Ammo Dark Rust which is a more orange brown! Confusing!) for damage followed by VMC Oily Steel and some VMA Steel. Starting to like the Vallejo Model Air Steel with it being brighter than the Oily Steel and should show up more on the model. So still adding further weathering with a brush but working off a steel base cuts out some of the leg work.
The black areas have been painted with VMC Dark Grey. I tend used a dark grey or black grey more for a black base than true black.
Also built and primed the next Escher.
The Emperor Protects.
Thursday, 28 March 2019
Progress Report 87.19.M3
Second Escher ganger finished (at last)..
Going to build the Escher's straight from the box to save time. With the Orlock's I messed around with weapon swaps from the box set, so building some not has GW suggested. With the Escher's will follow the build guide (unless I get bored or have a moment of inspiration)
The second module is now 99% complete. May add a few minor details but the main parts are now in place....
Built a set of pipes from Knightwing Models universal pipe sets. Designed for use with HO/OO scale but work well with 28mm too.
So now to buy more frames from Sally 4th to build further modules.
The Emperor Protects
Going to build the Escher's straight from the box to save time. With the Orlock's I messed around with weapon swaps from the box set, so building some not has GW suggested. With the Escher's will follow the build guide (unless I get bored or have a moment of inspiration)
The second module is now 99% complete. May add a few minor details but the main parts are now in place....
Built a set of pipes from Knightwing Models universal pipe sets. Designed for use with HO/OO scale but work well with 28mm too.
So now to buy more frames from Sally 4th to build further modules.
The Emperor Protects
Tuesday, 19 March 2019
Progress Report 78.19.M3
More work completed on the Escher ganger.
In fact she is nearing completion. Decided the pink was out and repainted that area with Foundry Leather Brown Triad plus a little VMC Medium Flesh for the final highlight. The 'trousers' were painted with VMC Park Green Flat. First by adding a bit of black then highlighting by adding VMC Ivory. In place in looked a little chalky so used GW Wayfarer Green Glaze for the first time. Only a thin coat but it likes okay.
Started to weather the lights and fan for the second modular board. Usually method of VGC Tinny Tin followed by a wash of GW Seraphim Sepia,
Made a start on the other wall units. Sponged on VMC Offwhite to try and give the appearance of the old colour coming through then MIG Ammo Chipping colour also by sponge to add a bit of damage.
The Emperor Protects.
Started to weather the lights and fan for the second modular board. Usually method of VGC Tinny Tin followed by a wash of GW Seraphim Sepia,
Made a start on the other wall units. Sponged on VMC Offwhite to try and give the appearance of the old colour coming through then MIG Ammo Chipping colour also by sponge to add a bit of damage.
The Emperor Protects.
Friday, 15 March 2019
Progress Report 74.19.M3
More detail added to the second module for the Underhive.
Completed the power points from Antenociti's Workshop. Then added 0.6mm copper wire to represent cables running across the floor, hidden under suitably painted plastic channel.
The plastic channel has been painted with Tamiya Flat Black and Flat Yellow. Given a rough drybrush and stippling with VMC Oily Steel and them weathered further with thinned VMC Smoke.
Also completed a little bit more on the Escher Ganger.
Keeping with the pink theme the loincloth/garment/rag or whatever it is meant to be on this model has been based with VMC Carmine Red then highlighted by adding VMC Beige Red and finally a touch of Ivory. Painting pink is well out my comfort zone, but the more you do the easier it becomes.
The Emperor Protects.
Completed the power points from Antenociti's Workshop. Then added 0.6mm copper wire to represent cables running across the floor, hidden under suitably painted plastic channel.
The plastic channel has been painted with Tamiya Flat Black and Flat Yellow. Given a rough drybrush and stippling with VMC Oily Steel and them weathered further with thinned VMC Smoke.
Also completed a little bit more on the Escher Ganger.
Keeping with the pink theme the loincloth/garment/rag or whatever it is meant to be on this model has been based with VMC Carmine Red then highlighted by adding VMC Beige Red and finally a touch of Ivory. Painting pink is well out my comfort zone, but the more you do the easier it becomes.
The Emperor Protects.
Monday, 11 March 2019
Progress Report 70.19.M3
After a short break work has resumed.
First up. The Power points have been started to be weathered and details painted.
Not much more to do to these.
Also finally got round to starting the next Escher gang member. Not much done but it's a start.
Also printed off several inspirational pictures. All 40K related and stuck them to the wall. Just as a reminder of what I am trying to create.
The Emperor Protects.
First up. The Power points have been started to be weathered and details painted.
Not much more to do to these.
Also finally got round to starting the next Escher gang member. Not much done but it's a start.
Also printed off several inspirational pictures. All 40K related and stuck them to the wall. Just as a reminder of what I am trying to create.
The Emperor Protects.
Sunday, 3 March 2019
Progress Report 62.19.M3
Doors completed for second Underhive module.
These were first chipped with VGC Tinny Tin followed by VMC Gun Metal Grey and then washed with Seraphim Sepia. Then used thinned down VMC Light Rust followed by GW Fuegan Orange for rust patterns. Then the last bit grime added with thinned VMC Smoke. The small clear plastic rod inserts supplied for the portholes a have been glued in and left as is.
The same process was completed on the metal frames for the hatches. Also completed the concrete and walls. Used VMA Aged White to dull walls and add variety to the floor. To further add age to the walls used a mix of VMA Light Camo Green with Middlestone approx. 75/25 mix. Airbrushed lightly onto walls and on floors to represent mold/algae. Then airbrushed Tamiya Flat Black on very low PSI onto top part of wall to try and give the appearance of darker mold. Floor was then washed with GW Seraphim Sepia.
So doors now in position and in closed and open position
Other pieces to be completed to give me time to decide whether to add more weathering particularly to the walls.
The Emperor Protects.
Subscribe to:
Posts (Atom)